2010 New Lotus Sports Cars Exige S240

British performance sports car manufacturer Lotus has officially unveiled their 2010 Lotus Exige S240.  While Lotus fans will recognize this as a very subtle update, the grille and rear wing facelift is a step forward for the mark. The exciting new 2010 Lotus Exige S240 enters the United States and Canadian markets in the fall of 2009 with new front styling, a new rear wing and the same rare combination of exceptional performance and high efficiency.

2010 New Lotus Sports Cars Exige S240

The Lotus Exige S240 features a roof integrated air intake scoop feeds air through the air-to-air intercooled and supercharged 1.8 liter Lotus-tuned and Toyota-sourced 2ZZ-GE engine with Intelligent Variable Valve Timing (VVT-i) to provide 240hp at 8,000 rpm and 170 ft.-lbs. of torque at 5,500.

The 2010 Lotus Exige S240 sprints to 60 mph in a blistering 4.1 seconds and the 100 mph barrier sails by in approximately 10 seconds with top speed is 150 mph. The Lotus Exige S240 is equipped with a 6-speed transaxle synchromesh transmission, traction control and launch control. New for 2010, the optional Track Package will include adjustable Ohlins dampers with threaded spring perches and remote oil reservoirs front and rear.

The Lotus Exige is a renowned high performance coupe that has a well earned reputation as the choice for drivers who demand uncompromised performance, both on the road and on the track. The 2010 Exige S240 introduces a few key enhancements to update the appearance and improve aerodynamic performance. A restyled front end and new larger, low drag rear wing, not only reduces drag, but also gives a more muscular stance enhancing the lightweight shrink-wrapped look of the whole car.

Passing along lessons learned on the track with the Exige GT3 racing program, Lotus Sport Cars has contributed another important technology – variable launch control combined with variable traction control. The launch control allows the driver to determine the number of revs they wish to use during a standing start. Having programmed that limit, the driver then holds their foot down fully on the throttle pedal and sidesteps the clutch pedal for a very quick departure from the line. The clutch damper cushions the severity of the clutch to transmission engagement to minimize the stresses to the drivetrain. The launch control also keeps wheel-spin at bay until 6 mph, after which the traction control assumes its duties.

Like all Lotus cars, the functional components of the car are also beautifully designed as Russell Carr, Chief of Lotus Design, explains, "For 2010 we have taken the already visually extreme Exige and given it even more visual drama. The changes we have integrated to the front and rear of the Exige signal an even clearer and purposeful intent. The functional rear wing is race-inspired, the new angular air intakes and full width splitter give a more hard-edged and aggressive look. Overall, the Exige appears more planted and gives the illusion that both the front and rear of the car are wider than they really are, yet without losing its agile and sleek character."

The new 2010 Lotus Exige S240 is scheduled to launch in the US and Canada in the Fall of 2009. This new 2010 Lotus Exige S240 goes on sale this fall with a starting price of $65,690 and will be available in an upgraded track package with added performance benefits. The 2010 Lotus Exige S240 will hit U.S. and Canadian markets this Autumn.

2010 , Lotus , Sports Car

2010 SpeedFactory Sports Cars SF600R Dodge Challenger

American tuners SpeedFactory have increased the output of the Dodge Challenger SRT8 from 425 hp to 600 hp (447 kW / 608 PS) without the use of a supercharger.

2010 SpeedFactory Sports Cars SF600R Dodge Challenger

Starting with the standard 6.1-liter HEMI engine engineers increased the displacement to a full 7.0-liters (426 cu in). In addition to a higher volume air intake system matched with a stainless steel Corsa exhaust , SpeedFactory also used "a custom Comp hydraulic cam along with an 85mm throttle body with a CNC machined stock manifold that is port matched with a blended plenum to produce a dyno-proven 595-605 HP on premium-grade 91 octane pump fuel," the company states in a press release.

Equipped with a six-speed manual transmission, SpeedFactory also adds a Getrag IRS and Centerforce clutch, as well as a few other goodies. The engine is not the only thing to get an upgrade on the car.  The vehicle's handling is buffed up with performance-grade springs, added struts, and new sway bars.  20-inch BBS wheels are wrapped in Michelin Pilot Sport PS2 tires.

Leather seats, leather door inserts, custom floormats and various badging round out the package.  The 2010 SF600R Challenger is now available, and costs $73,900.

Press Release:

SpeedFactory Introduces the 2010 SF600R Challenger

Atlanta, April 20, 2010 – SpeedFactory, the leader in modern Mopar supercars, today announced the industry’s first 6spd manual, 600 HP ‘SF600R’ Challenger, as part of their complete line of 2010 Mopar supercars.

The ‘R’ designation in the SF600R Challenger denotes a SpeedFactory hi-performance, normally-aspirated, bored, stroked and balanced 6.1L Hemi block, increasing the displacement to 426 cu. in. (7 liters).

This modern 426 powerplant has an all-forged rotating assembly and features CNC ported aluminum heads with new valves, guides, seals, Bee Hive springs and titanium retainers. A custom Comp hydraulic cam along with an 85mm throttle body works with a CNC machined stock manifold that is port matched with a blended plenum to produce a dyno-proven 595-605 HP on premium-grade 91 octane pump fuel.

Additional SpeedFactory performance modifications include a CARB- certified high volume air intake and Corsa stainless steel cat back exhaust system for better breathing. The increased power is managed with a Centerforce clutch and a Getrag IRS with 1000 HP half-shafts. Handling is improved with performance springs and sway bars as well as additional front and rear strut tower braces. The SF600R Challenger rides on premium Michelin Pilot Sport PS2 tires mounted on staggered 20? BBS Black Edition CH-R flow-formed wheels.

The SpeedFactory Signature package is also included on the SF600R and features a serial numbered plaque along with SpeedFactory exterior badging and graphics. Inside the SF600R features premium leather seats and door panels embossed with SpeedFactory branding as well as custom floor mats.

On the addition of the SF600R Challenger to the SpeedFactory line-up, Mike Brillanti, President, SpeedFactory Sports Cars stated “This car offers supercharged power in a normally-aspirated, 6spd manual package. It’s a true enthusiast’s sports ar and it enables us to widen the appeal of SpeedFactory products to now include a 600HP vehicle for those enthusiasts who prefer a ‘normally-aspirated’ powerplant. We offer the SF600R with either a 5spd automatic or the 6spd manual transmission. ”

2010 , SpeedFactory , Sports Car , Tuning

2014 New MG Sports Cars TF Roadster

LONDON — MG Motor has begun work on an all-new front-engine, rear-drive open-top sports cars to replace its aging midengine TF roadster, now 15 years old. MG insiders tell Inside Line that the company might consider selling the sports cars in the U.S., given the marque's history in North America, but currently have no solid plans for a return.

2014 New MG Sports Cars TF Roadster

MG and SAIC have to provide the Mazda Miata with a little competition which could mean trouble for Mazda. Right now, it seems that Mazda is doing some damage with the Miata and its faithful followers, but one look at this rendering and people might decide to jump ship and cruise with the MG.

Development is at a very early stage and has significantly lower priority than the company's plans to introduce both the new MG6 hatchback, already on sale in China, and a new supermini to its U.K. factory. MG's Chinese owner Shanghai Auto hopes to re-establish mainstream car production in Britain and relaunch the MG brand across Europe.

But the company believes that a new sports cars is essential to the long-term credibility of MG as a sporting brand. Though far from concrete, the aim is to introduce the model during 2014. It would be built at MG's Birmingham, England plant.

That means the sports car manufacturer will not actually be manufacturing any sports cars for at least three years, rather preferring to focus its attention on the new MG6 and a small city car to be built in the UK. MG plans to build the new sports cars in Birmingham, England, as the brand’s Chinese owner, Shanghai Automotive Industry Corp (SAIC), attempts to reintroduce MG throughout Europe. One source close to the project says that MG wants to create a direct rival to the Mazda Miata, which is why a front-engine, rear-drive layout is preferred.

The first rumored model to be offered will be the 2014 MG TF Roadster with a front engine or rear drive layout and a soft-top design. A retactable hadrtop will not be offered due to cost and complexity. Under the hood there will be a GM sourced turbodiesel, a gasoline V6 engine, and a hybrid powertrain based on the system in SIAC Rowe 750. Although production is 3 years off, sources close to the project tell us that the early designs for the 2014 MG TF resemble these renderings. Note that the TF will again employ a soft top design.

Sources tell us a midengine layout, as used on today's TF, has been rejected because of the styling and packaging limitations it forces on the car, while front-wheel drive has been eliminated for not being sporty enough. MG does not expect the TF to live much beyond the end of 2010, leaving the brand without a sports cars for at least three years while a new model is developed. The company has not ruled out trying to find a partner with which to share a platform.

2014 , MG , Sports Car

2010 New Porsche Sports Cars 911 GT3 at The Geneva

Stuttgart. Dr. Ing. h.c. F. Porsche AG, Stuttgart, is adding yet another new model to the second generation of the 911 model series: the new GT3 even more powerful, faster, and refined than its predecessor. In developing the most sporting and dynamic road-going 911 with a normal-aspiration power unit, Porsche has applied a wide range of know-how gained in motorsport. Indeed, this is precisely why the 2010 new Porsche 911 GT3 is truly impressive not only on the road, but also on the race track.

2010 Porsche Sports Cars 911 GT3

The 2010 new Porsche 911 GT3 is the latest evolution of an iconic sports car. Embodying the essence of more than 23,000 Porsche racing victories, the 911 GT3 is the ultimate integration of driver and car and arrives in the UK this autumn. The new 911 GT3 is making its world debut at the Geneva Motor Show on 3 March, with Europe-wide sales starting in May.

The Porsche 911 GT3 offers an even higher standard above all in two key areas: performance and driving dynamics. The proven six-cylinder naturally aspirated power unit now develops a maximum output of 435 hp (320 kW), up 20 hp over its predecessor. This results first and foremost from an increase in engine capacity by 200 cc to 3.8-litres and from improved cylinder head gas flow: now not only the intake, but for the first time also the exhaust camshafts, are adjusted by VarioCam.

A further important point is that, through its upgraded power and performance, the flat six 'boxer' engine also offers a significant increase in torque at medium engine speeds, a benefit of particular significance in everyday motoring. Clearly, this also means a further improvement in performance; the new Porsche 911 GT3 accelerates from a standstill to 62 mph (100 km/h) in 4.1 seconds and reaches 99 mph (160 km/h) in 8.2 seconds. Top speed is 194 mph.

The second emphasis in developing the Porsche 911 GT3 to an even higher standard was to further improve the car's driving dynamics. For the first time, the Porsche 911 GT3 comes with a particularly sporting variant of Porsche Stability Management (PSM), offering the facility to deactivate both Stability Control (SC) and Traction Control (TC) in separate steps. And to give the driver unrestricted, individual control over the driving dynamics of his car, these functions are not reactivated automatically even under the most extreme driving conditions, but only at the touch of a button.

The Porsche Active Suspension Management (PASM) fitted to the 911 GT3 has enabled Porsche engineers to make the springs and anti-roll bars stiffer yet again, thus ensuring even more precise handling in the PASM 'sports' mode. However, the PASM ensures appropriate ride comfort suitable for everyday use when in the 'normal' PASM mode. The Porsche 911 GT3 rides on new, lighter wheels in a racing-inspired design - with a centre locking nut - fitted with ultra-high performance (UHP) tyres. Tyre pressure monitoring is fitted as standard.

Making the car even more suitable for the race track, the new Porsche 911 GT3 will be available with the option of new and highly innovative Porsche Active Drivetrain Mount (PADM) engine mountings. These special engine mounts recognise a particularly sporting, race-like style of driving, making the normally 'elastic' engine mounts harder and particularly resistant. This retains all the motoring comfort of the GT3 in everyday traffic, while on the race track the effect of the mass forces coming from the engine is much reduced, particularly in fast bends and on winding tracks. Yet a further advantage is improved traction when accelerating from a standstill.

Another new feature is the optional lift system for the front axle which is able to increase the ground clearance of the car, at the touch of a button, for driving on bumpy surfaces or steep gradients - for example into an underground garage - by 30 millimetres (approx 1.2 inches).

The Euro base price of the new GT3 is Euro 98,100, in Germany the retail price including value-added tax and specific national features is Euro 116,947. In the USA the GT3 will be at the dealership in October at a price of USD 112,200 (MSRP without taxes).

2010 , Cars , Porsche , Sports Car

2010 Porsche Sports Cars 911 GT3 R Hybrid

Known as the 2010 Porsche 911 GT3 R Hybrid, the model hints at new hybrid technology that Porsche Sports Cars will use in its motorsport ventures. According to Porsche, the 911 GT3 R Hybrid will be used as a study to gather information about how hybrid drive will behave under a racing environment and will also help the German automaker study how it can be applied to its road cars.

2010 Porsche 911 GT3 R Hybrid

During Porsche's press conference here at the Geneva Motor Show, most of our attention was understandably on the 918 Spyder Concept, but the German automaker had several other significant debuts. One was the 911 GT3 R Hybrid, Porsche's first race car to feature electric power sourced from a duo of motors that send power to a generator attached the flywheel. Like many hybrid production cars, the motors are charged whenever the brakes are applied, and the driver can use the extra power for 6-8 seconds for overtaking.

Exactly 110 years after Ferdinand Porsche developed the world's first car with hybrid drive, the Lohner Porsche Semper Vivus, Dr. Ing. h.c. F. Porsche AG, Stuttgart, is once again taking up this visionary drive concept in production-based GT racing: During the Geneva Motor Show, a Porsche Sports Cars 911 GT3 R with innovative hybrid drive is making its debut, opening up a new chapter in the history of Porsche with more than 20,000 wins in 45 years scored by the extremely successful Porsche 911 in racing trim.

Unlike a conventional battery-electric hybrid system the Porsche 911 GT3 R uses a flywheel system, which gathers kinetic energy under braking to power two electric-motors that are mounted in a single assembly and are connected to the front wheel. After each boost of charge, the two motors provide 6 to 8 second jolts of power. The extra power is engaged by pressing a button on the steering wheel, providing up to 161-hp to the front wheels, assisting the 911 GT3 R Hybrid’s 480-hp 4.0L inline-6 that powers the two rear-wheels.

The innovative hybrid technology featured in the car has been developed especially for racing, standing out significantly in its configuration and components from conventional hybrid systems. In this case, electrical front axle drive with two electric motors developing 60 kW each supplements the 480-bhp four-litre flat-six at the rear of the 911 GT3 R Hybrid. A further significant point is that instead of the usual batteries in a hybrid road car, an electrical flywheel power generator fitted in the interior next to the driver delivers energy to the electric motors.

The flywheel generator itself is an electric motor with its rotor spinning at speeds of up to 40,000 rpm, storing energy mechanically as rotation energy. The flywheel generator is charged whenever the driver applies the brakes, with the two electric motors reversing their function on the front axle and acting themselves as generators. Then, whenever necessary, that is when accelerating out of a bend or when overtaking, the driver is able to call up extra energy from the charged flywheel generator, the flywheel being slowed down electromagnetically in the generator mode and thus supplying up to 120 kW to the two electric motors at the front from its kinetic energy.

This additional power is available to the driver after each charge process for approximately 6 - 8 seconds. Energy formerly converted - and thus wasted - into heat upon every application of the brakes, is now highly efficiently converted into additional drive power.

Depending on racing conditions, hybrid drive is used in this case not only for extra power, but also to save fuel. This again increases the efficiency and, accordingly, the performance of the 911 GT3 R Hybrid, for example by reducing the weight of the tank or making pitstops less frequent.

After its debut in Geneva the 911 GT3 R Hybrid will be tested in long-distance races on the Nürburgring. The highlight of this test programme will be the 24 Hours on the Nordschleife of Nürburgring on May 15th and 16th. The focus is not on the 911 GT3 R Hybrid winning the race, but rather serving as a spearhead in technology and a 'racing laboratory' providing know-how on the subsequent use of hybrid technology in road-going sports cars.

The 911 GT3 R Hybrid is a perfect example of the Porsche Intelligent Performance philosophy, a principle to be found in every Porsche: More power on less fuel, more efficiency and lower CO2 emissions - on the track and on the road.

2010 , Cars , Porsche , Sports Car

2010 New Porsche Sports Cars 911 GT3 R

Porsche has unveiled the 2010 new Porsche 911 GT3 R. The 911 GT3 R will be raced in series based on the international FIA GT3 regulations, thus succeeding the 911 GT3 Cup S. The 911 GT3 R is powered by a four-litre six-cylinder boxer engine delivering maximum output of 480 bhp (353 kW) transmitted to the rear axle by a sequential six-speed dog gearbox.

2010 New Porsche Sports Cars 911 GT3 R

The GT3 R offers 30 bhp more than the Porsche 911 GT3 Cup model. Both cars are based on the extra-wide body of the 911 GT3 RS street-legal sports car.

Porsche AG continues to work deep into the 2010 competition season. The new Porsche 911 GT3 R replaces the 911 GT3 Cup S in the range of competing models of the brand. The 911 GT3 R participate in the tests based on international regulations FIA GT3. A sequential gearbox six-speed is responsible for transmitting that power to the rear axle.

It is based on the Porsche 911 GT3 Cup, presented in September 2009, and intended to compete in single-brand glass. With the increase in displacement at 0.2 liters, the GT3 R achieves 30 hp increase in power compared to GT3 Cup racing Both vehicles take the widened bodywork of the 911 GT3 RS series.

The antilock brake system (ABS), traction control and electronic throttle prepared to adapt the engine speed in each gear change, making it much easier driving in relation to its predecessor, so this new model will also most appropriate for amateur drivers.

The Porsche 911 GT3 R weighs 1,200 kg, comes with an anti-lock brake system (ABS), traction control and an e-gas with “throttle-blip” function make it much easier to get used to this new GT3 racing car than its predecessor, meaning that the new model is also more appropriate for the ambitious amateur racing driver.

The flared wheel arches, both in the front and the rear channels show a higher compared with the previous model. The underside of the vehicle are fully lined and features a rear diffuser. The possibilities of regulating the rear wing have also been increased. The race suspension has several settings.

Front, McPherson has a structure adjustable in height, with SACHS shock variables and two-way dual dock. Behind, the GT3 R has a highly rigid sub-frame, with a multilink axle adjustable height and the Sachs shock absorber adjustable two-way dual dock.

The Porsche 911 GT3 R is making its world debut on 14 January 2010 at the Birmingham Motor Show and the price is 279,000 Euros.

2010 , Cars , Porsche , Sports Car